need measurements on a transaxel sideplate.
I got a "HEAVY DUTY IRS SIDE COVER FOR IRS" on my 1975 transaxel. (one of these:
https://www2.cip1.com/ProductDetails.as ... C10%2D4739 )
As i got oilcooler and other stuff in the way I can measure my own. I need the measurments marked in green and red on this pic.
Thanks!
measurements on a sidecover
-
Mathias
- Posts: 359
- Joined: Mon Sep 23, 2002 12:01 am
measurements on a sidecover
You do not have the required permissions to view the files attached to this post.
-
Bruce2
- Posts: 7094
- Joined: Sat Oct 13, 2001 1:01 am
Re: measurements on a sidecover
green: center-center = 59.1mm Measured 4 different stock side covers.
The aftermarket thick side cover I have is different than yours, however, it is 225mm OD.
The aftermarket thick side cover I have is different than yours, however, it is 225mm OD.
-
P_Vilefort
- Posts: 30
- Joined: Sun Oct 09, 2022 12:41 am
Re: measurements on a sidecover
A type 1 wasn't the only transaxle to have this side cover. ALL of the later transaxles have this type of side cover including the buses (type 2) and the Vanagon. So if the aftermarket cover is too large for your transaxle it is probably for one of the bus bodied vehicles.