Can find the answer in forums. What are the dimensions on the type 1 style fan shroud, to drill the holes for the oil cooler lines fitting?
Thanks in advance.
Type 1 Fan shroud oil cooler hoses holes?
-
VIPERGREEN76
- Posts: 48
- Joined: Sun Nov 02, 2014 8:53 am
Type 1 Fan shroud oil cooler hoses holes?
76 SEDAN
EC type 4 Conversion project
EC type 4 Conversion project
-
GARRICK.CLARK1
- Posts: 385
- Joined: Sun Dec 16, 2018 7:30 am
Re: Type 1 Fan shroud oil cooler hoses holes?
Hello. What I did was weld up the bottom holes on a dog house cooler mount, then drill and tap the front of the mount. Fit the cooler to the mount, fit the whole thing to the fan housing and mark out where to drill holes in the front of the fan housing for the oil lines.