You have an FI forum, how 'bout a good carb forum? =) Thanks.
Mark D.
Carburetor Forum
-
74baja1915
- Posts: 998
- Joined: Sun Feb 24, 2002 12:01 am
Carburetor Forum
sounds good to me thier are many different carbs out there and many different options to go with. it could help out a lot of vdubbers. some of us are between high performance and daily drivers but thier is no forum for that????
------------------
If its not broke don't fix it, but if it can be made better by all means do it!
------------------
If its not broke don't fix it, but if it can be made better by all means do it!
-
mrbajadude
- Posts: 127
- Joined: Thu Mar 14, 2002 12:01 am
Carburetor Forum
Hiya guys, I too think there should be a carb forum. Many,many posts are regarding carb questions/problems. BUT, who wants to be the moderator?????????????? Ol' John
- Lavabo
- Posts: 149
- Joined: Tue Nov 27, 2001 12:01 am
Carburetor Forum
yes yes yes gogogogo dell, weber,zenith, solex, holley... named them!!
-
scottk
- Posts: 1736
- Joined: Tue Jun 18, 2002 12:01 am
Carburetor Forum
Any carb post could be placed into the newbie forum, the type I forum, or the speed forum. FI has their own forum, but it is because they are not as common. Most of the VW community has to deal with carbs so those questions easily fit into the above 3 forums.
Scott
Scott
- vtec this
- Posts: 741
- Joined: Wed Jun 26, 2002 12:01 am
Carburetor Forum
I was just about to post a request for a carburetor forum. I a most interested in Weber carbs, especially the duals. This should include jetting recommendations, venturi sizing, and LINKAGE SETUP AND ADJUSTMENT (that's my problem now with the Tyco linkage).
-
scottk
- Posts: 1736
- Joined: Tue Jun 18, 2002 12:01 am
Carburetor Forum
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by vtec this:
I was just about to post a request for a carburetor forum. I a most interested in Weber carbs, especially the duals. This should include jetting recommendations, venturi sizing, and LINKAGE SETUP AND ADJUSTMENT (that's my problem now with the Tyco linkage). <HR></BLOCKQUOTE>
All that could be covered in the speed forum.
Scott
------------------
Scottk@shoptalkforums.com
I was just about to post a request for a carburetor forum. I a most interested in Weber carbs, especially the duals. This should include jetting recommendations, venturi sizing, and LINKAGE SETUP AND ADJUSTMENT (that's my problem now with the Tyco linkage). <HR></BLOCKQUOTE>
All that could be covered in the speed forum.
Scott
------------------
Scottk@shoptalkforums.com