air intake boot

njv · Post by **njv** » Sun Jun 09, 2002 2:53 pm

hi
anybody here got a spare air intake plastic boot that fits to the fan housing from a t4 varient so i can fit a t4 engine into my t3 varient,

------------------
neil verdon 1966 t3 sqr on irs pan.

Fritz · Post by **Fritz** » Mon Jun 10, 2002 1:31 am

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by njv:
<B>hi
anybody here got a spare air intake plastic boot that fits to the fan housing from a t4 varient so i can fit a t4 engine into my t3 varient,
</B><HR></BLOCKQUOTE>
the german 411/412 spare parts guru,
perhaps ask him:

Jörg Rudat
Auf der Bleiche 6
D-58300 Wetter /Wengern
Tel.: 0 23 35 / 974851
Fax: 0 23 35 / 97 48 52
eMail: rudat-vw@tpp24.net

njv · Post by **njv** » Mon Jun 10, 2002 3:40 pm

hello.
many thanks there for the steer.

------------------
neil verdon 1966 t3 sqr on irs pan.

njv · Post by **njv** » Tue Aug 27, 2002 4:52 pm

hello all
well i still need the air intake boot been away for a while anybody got any idears?

all help most appreciated.

alsehendo · Post by **alsehendo** » Wed Aug 28, 2002 4:27 pm

Is this a nessary cooling part my 412 that I just got is also missing this. It is not on a 914 or bus is it?

Chris Hobbs · Post by **Chris Hobbs** » Fri Aug 30, 2002 5:13 pm

The cooling fan boot ensures that your cooling fan sucks in cool outside air from the side vents, instead of hot air from around your engine (especially when your original foam engine seal has long since turned to dust). The boot should also have a long clamp to secure it to the plastic fan guard.

This seems to be a part that previous owners keep throwing away for some reason. One of my 412s was missing it and I had to get a replacement from a trip to a VW junk yard. I have heard that there are a couple in western Penna. that specialize in Type 4 junkers. Or you could try [url=http://www.uneedapart.com,]www.uneedapart.com,[/url] a search service for junkyard parts.

[This message has been edited by Chris Hobbs (edited 08-30-2002).]

alsehendo · Post by **alsehendo** » Fri Aug 30, 2002 8:17 pm

I know were their are several junkers around the country for I have looked high and low for a peice of glass and found it.

I realy don't know what the thing even looks like. I found a 411-42 hayes manual on ebay maybe it will show me.

What was left of the cooked original just seemed to be a hard plastic insert inside the fan shrowd.

I sure wish I had a picture of a corectly configured engine bay with this and the heater blower installed.

JawKnee · Post by **JawKnee** » Sat Sep 07, 2002 9:52 pm

I have a spare T3 boot. Used but in good condition. I dont even know what size is required to attach to the T4 engine, but at least the T3 side will fit.

njv · Post by **njv** » Thu Oct 31, 2002 5:40 pm

hello
well i still need the plastic air intake boot for the back of my engine anybody help out somebody must have a spare all those scrapped cars out there.

many thanks.

------------------
neil verdon 1966 t3 sqr on irs pan.

dphdo · Post by **dphdo** » Fri Nov 01, 2002 4:49 pm

I think I have one. I'll check in the morning (11-2-02)

SMILES
Dale

njv · Post by **njv** » Sun Nov 03, 2002 5:31 pm

hello
he says tentatively from the corner with everything crossed did you find one if so lets talk. your time is most appreciated.

------------------
neil verdon 1966 t3 sqr on irs pan.

dphdo · Post by **dphdo** » Mon Nov 04, 2002 5:08 pm

Well blast it all, I KNOW I have one in good shape, I just have to dig it up, but I'm positive I have one. e-mail me at dphdo@aol.com

njv · Post by **njv** » Tue Nov 05, 2002 8:06 am

hello.
you have mail!!!

------------------
neil verdon 1966 t3 sqr on irs pan.

PapaG · Post by **PapaG** » Mon Dec 02, 2002 4:19 pm

Anyone have a picture of this elusive beast?
Any one try to have something made?
Someone send me one. The ETKA CD shows a drawing showing 2 differnt boots, and 2 housing and a clamp.. I know some people who can duplacate the plastic parts and the rubber part too. (so they say)

alsehendo · Post by **alsehendo** » Tue Dec 03, 2002 2:42 am

I need the plastic part I have the rubber--e-mail me if you have one to sell,

madisonnet34@madisonnet.com