Hi guys I have a 77 bay window bus and I was wondering how hard it would be to convert it to right hand drive? Its not somthing I would do right away or anything but I have always wanted a right hand drive car. I know that the dash comes right out so would this be a bolt in swap? So far it seems like I would have to swap the beam and dash and cut some holes in my floor. My bus is an auto so learning how to shift with my left hand isent a problem. I know the hardest part would be getting these parts but how hard would it be to do. Would I need to do any welding or anything. Please let me know.
Thank You,
Chris R.
http://www.geocities.com/thebaywindowcenter/