Page 1 of 1
944s suspension on a trekker
Posted: Thu Jul 25, 2002 9:19 am
by wizard
I am putting the rear suspension on a trekker that will be drag raced. has any one done it before?
------------------
Adam
if everyone looked the same we'd be tired of looking at each other
944s suspension on a trekker
Posted: Thu Jul 25, 2002 11:42 pm
by Bob Ingman
Adam, you`ll likely get a response to this issue if you post on off-road forum as well. The guys there are suspension knowlegable. Thenks for posting. Bob Ingman
944s suspension on a trekker
Posted: Fri Aug 02, 2002 1:20 am
by Jim Andritsakos
Hi Adam,
I was done it in my 1975 181 but with the late 951 aluminium trailing arms.It is a straightforward operation and you can have the adjustable spring plates fully operational as the 181s chassis is different there.At the front you need to install some beetle spindles as the 181 are raised.
Rgds,
Jim