Page 1 of 1
Flywheel Question
Posted: Thu Jun 12, 2003 10:16 am
by JohnConnolly
OK, I'm learning too.
1985 Vanagon, I'm putting in a 2.1L rebuilt wasser. I need a flywheel. I know the 228mm bus pressure plate and clutch is the same, but is the flywheel?
TIA
John
Posted: Thu Jun 12, 2003 5:22 pm
by Pillow
From what I understand all the vanagon manual flywheels are the same. Forged as well which is good.
Granted I would wait for someone to put an "amen" on this though as I am not certain.
Posted: Thu Jun 12, 2003 6:07 pm
by Tom Notch
I can have one sent to ya if ya don't have one local. NW Conrod has stacks o wheels ready to go.
Posted: Fri Jun 13, 2003 9:52 pm
by JohnConnolly
I have a stack of 228mm Bus/Vanagon aircooled flywheels, but still don't know if they are the same as wasser! :-/
Bueller?
John
Posted: Fri Jun 13, 2003 10:27 pm
by Tom Notch
JohnConnolly wrote:I have a stack of 228mm Bus/Vanagon aircooled flywheels, but still don't know if they are the same as wasser! :-/
Bueller?
John
same thing.
Posted: Sat Jun 14, 2003 7:28 pm
by JohnConnolly
PERFECT! Thanks Tom.
John