Cylinder Head Hardware

Dave_Darling · Post by **Dave_Darling** » Mon Mar 10, 2003 9:43 am

Maybe you're not asking for stock 2.0 914 valves? I know that Jake hates the sodium-filled exhaust valves with a passion, but they were stock in the 2.0 914 and they are out there. Just be sitting down when you look for the price...

At one point, at least, there were cheaper regular valves in the correct size. I haven't looked for them in a long time, though.

--DD

------------------
1974 VW-Porsche 914 2.0 (Type IV powered!)

Pelican Parts' 914 Tech Geek http://www.pelicanparts.com

Guest · Post by **Guest** » Mon Mar 10, 2003 3:06 pm

pelican parts lists stock 2.0 valves this size. I want to use stainless so will probably go bigger from aircooled.net Larry

1967Fastback · Post by **1967Fastback** » Mon Mar 10, 2003 5:54 pm

fredybear · Post by **fredybear** » Mon Mar 10, 2003 6:02 pm

CIP1 has some cheep type 4 valves...

they anygood or they gonna snap in half???

------------------
Fredy-
55 bug-
63 bug-
67-bug sunroof
68-bug

Guest · Post by **Guest** » Mon Mar 10, 2003 8:50 pm

your order went out, BUT...The valves you ordered are T-1 valves. We only have 46.5 and 48mm intake, and 38mm exhaust for the T-4.

I am holding off on sending the valves or seats until I hear from you.

John
Aircooled.Net INc.
I haven't found these on his website.Does anyone know if these are thinner guides or what they're made of? I will let you know when I get a reply from John

1967Fastback · Post by **1967Fastback** » Wed Mar 12, 2003 6:46 pm

BergRace · Post by **BergRace** » Wed Mar 12, 2003 10:00 pm

Try this: http://www.sivalves.com/

------------------

P.J.Berg.

Guest · Post by **Guest** » Thu Mar 13, 2003 8:16 pm

Thanks PJ. It looks like a good prospect. Has anyone used these valves? John at Aircooled suggested getting mine from Manley But they don't list as many options for a type4 without getting them custom made. I think I'll go 44/36. Larry

Guest · Post by **Guest** » Fri Mar 14, 2003 2:52 pm

They have the 42mm intake, part # 13007e. They were very helpful however they dont stock seats for a type 4. Larry

Guest · Post by **Guest** » Tue Mar 18, 2003 7:26 pm

I got my SI Valves tonight. They look fine, all 8mm stems. Price seemed very reasonable.$75 for 8 stainless valves, 4 guides and shipping. Heads are going to the machinist tomorrow. Larry