Page 1 of 1
How long are your rods?
Posted: Tue Sep 30, 2003 1:22 pm
by Russ1302
I'm trying to figure out a good combo, and need to know some rod specs. Can anyone tell me the length of 1.9 and 2.1 WBX, and stock T1 rods?
Thanks
Russ
Posted: Tue Sep 30, 2003 4:18 pm
by marcotheturbosteamengine
there all the same length but the WBX rod has 24mm small end, everything but that is the same!
Posted: Tue Sep 30, 2003 8:39 pm
by Tom Notch
5.394"
Posted: Sun Oct 05, 2003 12:49 am
by Bruce2
137mm
Posted: Sun Oct 05, 2003 1:59 am
by tommi nylund
I think you can calculate the optimal con-rod lenght to your stroke like this:
Basic factor (I don´t know what it is called in english) should be between 1,7 - 1,9..
So if you have 76mm stroke for example, you must do it like this:
76 * 1,8 = 136,8mm (about 5.39")
Hope that helped?