Hey can anyone tell me if the white wire with a gray protective cover coming from the group that goes to the right(#1) side fuel injectors and splits off to the throttle body plug goes to the starter? There is a small grommet in the back plate that is open and it would only reach somewhere around that area(18" from throttle body branch).
Thanks Bill
Wiring question? Wire from fuel injection group.
-
vwbill
- Posts: 970
- Joined: Sat Feb 15, 2003 12:01 am
- raygreenwood
- Posts: 11912
- Joined: Wed Jan 22, 2003 12:01 am
-
vwbill
- Posts: 970
- Joined: Sat Feb 15, 2003 12:01 am
Fuel injection wire question
Hey Ray, thanks for the reply! I'll look for a number on the wire. Should it be on the end of the wire? Thanks again Bill
-
vwbill
- Posts: 970
- Joined: Sat Feb 15, 2003 12:01 am
Re: Fuel injection wire question
Hey Ray was looking at the my removal pictures and it came out the back of the tin right side to the starter. Its a white twin wire single plug. No place else to go. Thanks Billvwbill wrote:Hey Ray, thanks for the reply! I'll look for a number on the wire. Should it be on the end of the wire? Thanks again Bill
- raygreenwood
- Posts: 11912
- Joined: Wed Jan 22, 2003 12:01 am