Shoptalkforums.com

Just re-building a 34-pic-3 and have some questions on basic settings for the Air control and Volume control settings.

What would be the starting setting for the Air Control (the large screw on the Drivers side of the carb) when I mount the carb for the car to start and at least a rough idle?

I belive that the Volume control screw (the smaller screw on the drivers side of the carb) is set to 2.5 turns, but I cannot find a basic setting for the other screw.

Any other settings that will help make the process smoother...

Thanks
RF

Randy do you have an idiots manual? It should have what you need. Good luck. Bob Ingman

I do have it, I will have to take a look...

Thanks
RF

If you do not find it get back . I have the Bentley and Haynes. Good luck. Bob Ingman

Is the closest, but does not state a start value.

RF

But I did find a great breakdown at Kymco...

http://www.kymcovw.com/Media/pdfs/solex_info.pdf

http://www.kymcovw.com/Media/pdfs/Carb_Adj.pdf

http://www.kymcovw.com/Media/pdfs/carb_trb.pdf

Includes adjustment proceedures (just not what I am looking for...)

RF