Page 1 of 1
Heat resistant paint
Posted: Mon Dec 15, 2003 6:16 pm
by waynek
Hi all,
I recently picked up a new "raw" header system and muffler,so now
I'm looking to coat it in a black high temp paint or coating.
Any suggestions on what to use.
Thanks in advance to all and it's a great forum.
WayneK
Posted: Tue Dec 16, 2003 5:19 am
by Capn Skully
POR-20 It will stop the rust before it starts and give you a good finish to boot. POR-20 actually cooks onto the metal. Don't confuse it with POR-15. Not a POR rep just a satified customer.
Posted: Tue Dec 16, 2003 8:44 am
by Bob Ingman
Hey Capn I was just going to say the same thing. POR 20. Nothing is perfect as a header PAINT but this is probably the best thing out there right now. Best of luck. Bob Ingman
Posted: Tue Dec 16, 2003 2:27 pm
by waynek
Thanks guys,
Now I need to look for a supplier in Canada.
Posted: Wed Dec 17, 2003 5:23 am
by Capn Skully
Posted: Wed Dec 17, 2003 7:34 am
by waynek
Thanks Capt Skully,
Went to website, called tollfree and they directed me to a dealer about
an hour from me, plus they have in stock....
Posted: Wed Dec 17, 2003 8:18 am
by stkbus
deleted
Posted: Wed Dec 17, 2003 10:38 am
by Capn Skully
A crawfish burner huh? I forgot that Texans have taken up the habit of pinching tails and sucking head. Enjoy!!
Posted: Wed Dec 17, 2003 3:04 pm
by Bob Ingman
Stkbus can you tell us more about Thermolux? What sizes are available? Price?Color selection? How to apply etc etc. This sounds like very good stuff to withsatnd 2000 deg F.
Posted: Wed Dec 17, 2003 3:13 pm
by stkbus
deleted
Posted: Thu Dec 18, 2003 6:54 am
by stkbus
deleted