Looking for 86+ WBX bearings

Jim Andritsakos · Post by **Jim Andritsakos** » Mon Jan 12, 2004 12:02 pm

Hello guys!

I was looking for the later (1986 on) bearings and also for the thrust bearing in size 0.40 (it is +1.00) any size crank is accepted 0.40/0.20 for example.

Thanks in advance!

pocketrocket · Post by **pocketrocket** » Mon Jan 12, 2004 1:10 pm

Jim, I'm not sure which brg you need. I have the 2.1 main brgs & .040 bug Line Bore brgs. in any size. Let me know what size to the crank you want. Rocky email rjebay@hscis.net

Jim Andrits@kos · Post by **Jim Andrits@kos** » Mon Jan 12, 2004 2:14 pm

Hello Rocky!

Well, I need 0.40 case bore size (+1.00) for wasserboxer (vanagon watercooled boxer) 1986+ (2.1 style)

Thanks!

pocketrocket · Post by **pocketrocket** » Mon Jan 12, 2004 4:24 pm

What is the crank size std .25mm, 50mm, ect. Shipping is the biggest cost IF I have to make out a customs form that costs $7.50 the BUG brg set is $35.00 & the shipping UPS is about $20.00 to $30.00. Thats alot just for a set of brgs. Are you putting a bug crank in a h2o boxer case? Rocky

Type 5 Joe · Post by **Type 5 Joe** » Mon Jan 12, 2004 6:38 pm

Hi Jim,

It looks like CSP in Germany carries all sizes of Main Bearings for the 2.1 WBX...

Look on their web-site.. They have alot ..

This *might* be a little easier for you guys on the European side of the Globe.

- Joe

Jim Andritsakos · Post by **Jim Andritsakos** » Fri Jan 16, 2004 1:57 pm

Nice to hear from you Joe!

I have check already csp and they have just std/0.10/0.20 ...
I need the damm 0.40 (+1.00) bearings because the case is in excellent condition and I don't want to toss it...

Rgds,