Page 1 of 1
syncro transaxale size
Posted: Thu Apr 22, 2004 8:14 am
by Hank Winning
Hey Gang,
Does anybody happen to have a engine out of a syncro?
I'd like to know for sure if the mating surfaces on the transaxle is different than on a air cooled motor
thanks
hank
Posted: Thu Apr 22, 2004 3:00 pm
by Type 5 Joe
Hi Hank,
It's the same as any late model 091 bus Trans....
- Joe
Posted: Fri Apr 23, 2004 7:19 am
by Hank Winning
Thanks for the reply Type V Joe,
But I'm not sure on the different ID #'s on the VW bus transaxles -ie: 050 or 091
What I'm trying to find out is does the 091 trans have the same engine mounting pattern as the rest of the air cooled VW transaxles?
thanks
hank
Posted: Fri Apr 23, 2004 8:18 am
by Type 5 Joe
Yes, a bug motor will bolt up... 091's are used all the time with a bug motor / Type IV / Wasser.
The input shaft will need to be swapped to the shorter (002 bus) for a bug motor.
- Joe
Posted: Fri Apr 23, 2004 3:41 pm
by Steve Arndt
It is a good idea to try the search feature.
Posted: Fri Apr 23, 2004 5:45 pm
by Jim Andritsakos
To be exact all 5/83+ (watercooled) vanagons inc syncros has the later 094 code box!