ohman did i blow my regulator

subrhyme · Post by **subrhyme** » Sun May 09, 2004 3:28 pm

Okay here we go. I'm not getting any spark from the coil. I checked under the back bench of my 412 wagon and saw that my fuse was blown, so I replaced it. Now it still wont start. Im notgetting any spark. Do I have to manually set something on the regulator, does somebody have a way to test a regulator? I know my coil and my wires are all good, so anybody could help I'd really appreciate it, thanks!

raygreenwood · Post by **raygreenwood** » Sun May 09, 2004 5:44 pm

You have power to turn over the starter? Check for spark. Which fuse was blown? Next check to see if the injection system is getting juice. Ray

subrhyme · Post by **subrhyme** » Sun May 09, 2004 6:59 pm

Yes the starter turns no problem. I have no spark at all, I think the fuse was the ignition fuse, Im not sure, its an 8 amp fuse under the back bench
andthe wires that went to the fuse holder were green. Sorry I didnt mention this before but I have a carburetor not fuel injection.