Shoptalkforums.com

I am in the process of finding a good location to mount my remote oil filter adapter. I have seen a number of Things that ave hahd the adapter just screwed to the top back eadge of the engine compartment. I am concerned that three self tapping screws will not do such a good job of holding the adapter in place. I also do not really want to drill holes in my engine compartment. Today while I was working on other stuff on the car I figured out that I could build a bolt on mount that would bolt to the driver's side stock oil bath air cleaner mount. I started making a mock up and then thought that someone else must have done this before. Is there anyone who has built this mount? Other thoughts on mounting locations would also be appreciated. K-mann

Kubelmann the brackets (air filter canister) on either side of the engine compartment I have found quite handy for this type of use.
On the left I have mounted my fuel pump/regulator and on the right the external voltage regulator (late T-2). It actually looks better having something there than it does without . The little extra air streem in that location probably will not hurt a thing either. You should have room after hooking up your 45 Dells. Personally I think you will. I used them when using 36 Dells and again now with 40`s.. Best of luck. Bob Ingman