GET THEM WHILE THEY ARE HOT!!!!

DeathBus · Post by **DeathBus** » Tue Feb 22, 2005 5:35 pm

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WD1V

DeathBus · Post by **DeathBus** » Tue Feb 22, 2005 5:37 pm

I bought 4

raygreenwood · Post by **raygreenwood** » Wed Feb 23, 2005 4:07 pm

DB.....

Please tell me you spent very little money....uh.....those kits only fit the 69 with the 19mm slave cylinder. I have seen two in my life and they have a really low grade synchro set up in them. They will not fit your model of slave cylinder...which has a 44.5mm piston

Ray

DeathBus · Post by **DeathBus** » Wed Feb 23, 2005 4:30 pm

oops!

nah didnt pay much at all!

Guest · Post by **Guest** » Wed Feb 23, 2005 4:44 pm

I'm mixed up I thought they were kits for clutch master cylinders and not clutch slave kits. I thought clutch masters were the same but slaves were different.

Just curious Terry

DeathBus · Post by **DeathBus** » Wed Feb 23, 2005 4:58 pm

Anonymous wrote:I'm mixed up I thought they were kits for clutch master cylinders and not clutch slave kits. I thought clutch masters were the same but slaves were different.

Just curious Terry

ditto

raygreenwood · Post by **raygreenwood** » Wed Feb 23, 2005 5:15 pm

Hey...but hang onto them. I do know where a good 1971 4 speed is. Also they are almost identical to the Audi cylinder. Or did the audi have 23mm...hmmmm....checking. Ray

ubercrap · Post by **ubercrap** » Wed Feb 23, 2005 9:16 pm

Wait, what?

Quote from vwbill:

Hey Guys , here are the two kit numbers I got and the parts listing from FTE. RK19221(ClutchMaster Kit)

Quote from ebay ad:

Bidding is for one new clutch master cylinder repair kit, part number RK 19221 or factory number 411-798-045. This fits VW 411 and 412 from 1969 through 1974.

So, 411-798-045 is not RK 19221? Or are the parts pictured neither?

Somebody needs to tell them if they are selling the wrong part number?

vwbill · Post by **vwbill** » Wed Feb 23, 2005 10:19 pm

Hey Guys, I have the 44.5 mm slave sealing rings which are the H4435 part of the kit for the slave cyl. I think the kit DB listed the link to is the clutch master kit? I think the auto clutch master might be different?
We could always email the FTE rep; she was very very helpful!! bill

ubercrap · Post by **ubercrap** » Wed Feb 23, 2005 10:34 pm

auto?

Uh...

Shoptalkforums.com

GET THEM WHILE THEY ARE HOT!!!!

GET THEM WHILE THEY ARE HOT!!!!

I think that is for a clutch master???