Racing Pads for 5.25 Wilwood Clone Calipers
-
vwo60
- Posts: 77
- Joined: Fri Oct 14, 2011 2:29 pm
Re: Racing Pads for 5.25 Wilwood Clone Calipers
I have fitted a set of Tarrox callipers to my Ghia, also a set of vented rotors, they are the same dimension except they are 20MM thick, they will bolt straight onto a ball joint disc brake spindle, a ball joint disc brake dropped spindle and a link pin disc brake dropped spindle with the ball joint stub, the callipers have the same offset and hole centers and the standard callipers except they fit the 20mm rotors. no adaptors or brackets required.
You do not have the required permissions to view the files attached to this post.
-
Steve Arndt
- Posts: 7419
- Joined: Sat Mar 10, 2001 12:01 am
Re: Racing Pads for 5.25 Wilwood Clone Calipers
Where can we find those parts? Part numbers or links? The rotors are like the "Kerscher" CSP rotors right?vwo60 wrote:I have fitted a set of Tarrox callipers to my Ghia, also a set of vented rotors, they are the same dimension except they are 20MM thick, they will bolt straight onto a ball joint disc brake spindle, a ball joint disc brake dropped spindle and a link pin disc brake dropped spindle with the ball joint stub, the callipers have the same offset and hole centers and the standard callipers except they fit the 20mm rotors. no adaptors or brackets required.
Steve
My Baja Build
My Baja Build
-
vwo60
- Posts: 77
- Joined: Fri Oct 14, 2011 2:29 pm
Re: Racing Pads for 5.25 Wilwood Clone Calipers
Heritage vw in the UK used to do them, Tarrox site and calliper details. B27 6 http://en.tarox.com/products/racing-brake-calipers.html bolt straight on.no track increase, I run these with the CSP master cylinder 20.64mm