Problem of the day. Post it up!

[madmike]

Hey Heinz, maybe an electric pump is in order? holly red or Blue is what I'm using and a boost ref holly regulator

[Heinz Willie]

Hey Heinz, maybe an electric pump is in order? holly red or Blue is what I'm using and a boost ref holly regulator

Thanks for the response MadMike I can totally do that, but sometimes it's the challenge of just figuring it out. Others have done it with mechanical pumps, so I'm wondering if I have a known problem here that people live with or maybe I'm the only guy with a center mount blow through and a mechanical pump combo? Or possibly I've got another issue I have yet to figure out ....

[madmike]

Ya once I switched to 48 Ida's I needed the flow so Holly Blue did it, I've run stock pumps with 44 IDF's with no issues.when They were N/A
since my cars are set up for electric pumps I'll use them for Turbo

[Fiatdude]

I'd like to recommend using a by-pass regulator on any Holley pump -- I was always having a short life span on my pumps and once I went to a by-pass reg with a return line my pump temps went way down and their life span went way up

[madmike]

I'm switching to a red pump, I think the blue was to much for the 2276 and it was flooding the carb so bad I have fuel dripping out the Aux vents @ idle
also 'cracked cylinders' on the last pass
but I' so deaf couldn't hear detonation if my ass depended on it plus the fact I had the boost cranked up as high as the little control knob will go

[madmike]

Hey Harold,I grabbed a Bypass reg. Areomotive from Jegs on my last order seems my helper read the fuel pressure Gauge
WRONG was set too high on the last setup,,,

[andy198712]

Don't blame someone else

[madmike]

,,,HaHa u must know my wife
But it's my Pit chiefs' fault I can'nt see/read the gauge from the cockpit,it's mounted on the carb

[madmike]

who stocks a rebuild kit/diaphragm for CarCraft/Turbonetics WasteGates??????????????????????
I need two

[MarioVelotta]

Turbosmart

[madmike]

Hey Mario,, as in a new Turbosmart gate?
or do they have parts? got a link?
Thanks,Madmike

[Chip Birks]

New gate

[MarioVelotta]

I was referring to a new Wastegate, should have been a little more specific.

[madmike]

but these are so 'purdy' and I was hoping to use them

[Chip Birks]

So dang big though