Project CFC#1, turbo, back halfed and light (new name, new car page 15)

Chip Birks · Post by **Chip Birks** » Mon Apr 25, 2016 10:59 am

You Europeans and your Porsche spares...

Car looks good!

bug66 · Post by **bug66** » Mon Apr 25, 2016 3:18 pm

Chip Birks wrote:You Europeans and your Porsche spares...
Car looks good!

They are great! Light, forged, and produced in Norway

And bought individual, cheap too

Chip Birks · Post by **Chip Birks** » Mon Apr 25, 2016 3:36 pm

What are they from? Cayenne? I see lots of Boxter spares on eBay and such. Same thing?

bug66 · Post by **bug66** » Tue Apr 26, 2016 12:45 am

Chip Birks wrote:What are they from? Cayenne? I see lots of Boxter spares on eBay and such. Same thing?

85/86/87 944 (951) Turbo. So not alot of them ever made. Think 15-16.000 cars over those years. Each car with one spare.

bug66 · Post by **bug66** » Fri Apr 29, 2016 1:53 am

Latest addition:

Custom breather box. 40mm in and out (about 1 5/8")

bug66 · Post by **bug66** » Wed May 04, 2016 11:33 am

Now sporting a 25liter/6 gallon water tank up front!

Needed to take the new tank for a test, and it does work...

First up, a smoothie at the local supermarked.

Than a trip by the Norwegian VAG importer

And back in the garage the log check. Still on wastegate pressure.

A litte rich, but need too add compensation to the WG before fiddling to much. My ID1000 injectors (flowed 900cc at 45psi) is maybe a little too small, and need upgrading. Fuel pressure is set at about 50-53psi.

andy198712 · Post by **andy198712** » Wed May 04, 2016 11:46 am

Love the wheels! Porsche right?

bug66 · Post by **bug66** » Wed May 04, 2016 11:49 am

andy198712 wrote:Love the wheels! Porsche right?

Yes, Porsche spares. More info som posts ago

bug66 · Post by **bug66** » Mon May 09, 2016 1:32 am

Incredible weather the last couple of days in Norway! 23C + and no clouds.

That can only mean a cruise

DSC_0259 (Custom).JPG

bug66 · Post by **bug66** » Sat Jun 18, 2016 12:59 pm

Dyno-time!

Today I took a trip along with Kalle to Hamar around 150km from Oslo for a dyno shoot out

Departure from our hangar around 7 o'clock this morning. The car stood on the dyno a little before 10am and we managed 9 or 10 pulls all togheter.

Some struggling because the boost solenoid fails to compensate pressure on top of the wastegate spring before 50% compensation, so I need to either replace it or clean it inside and check for pulsing.

In addition, I'll re-route the lines to the solenoid and wastegate. Just so the solenoid can get some " cleaner "air to work with.

Engine runs PIG rich! About. 10.2 to 10.5 while it is spooling. That allows the injector duty cycle to hit the ceiling of 100% ... So much for 900cc flow tested injectors.

But .. By leaning out, that can be enough to pull down the DC to maybe around 90%. Maybe...

ID1000 Injector is said to handle 450 engine horses on E85.

Ignition wise we are relatively kind to the engine at 17 degrees at 1.8 bar. Very kind really.

So there is plenty potential left!

The turbo soups some oil, and I've ordered a T3 / T4 rebuild kit.

Today's happy news is 369hk on 5650omdr and 517nm on 4650omdr! And this is at the wheel!

bug66 · Post by **bug66** » Sat Jun 18, 2016 1:06 pm

Clip here:

andy198712 · Post by **andy198712** » Sun Jun 19, 2016 7:45 am

Wow! Bet that shifts!

Congrats

bug66 · Post by **bug66** » Tue Jun 21, 2016 5:21 am

andy198712 wrote:Wow! Bet that shifts!

Congrats

Thanks! Yes, it will be quite the handfull

bug66 · Post by **bug66** » Mon Aug 22, 2016 9:37 am

First outing with the new engine this weekend.

Made 7 or 8 passes, with 2 in the 10's!

10,626 @ 213kph/132mph, 1,606 60foot. 6.909 halfway @ 167kph/103mph
10,633 @ 211kph/131mph, 1,441 60foot. 6.870 halfway @ 164kph/101mph

More too come. The 10.626 run was without the switch to the waterpump turned on and peaked at 111C/232F intake temp :p

Need new tires atleast!

FIlm:

bug66 · Post by **bug66** » Mon Aug 22, 2016 9:45 am

FB_IMG_1471718480436.jpg

FB_IMG_1471718488846 (1).jpg

FB_IMG_1471788914921 (Custom) (1).jpg

DSC_0538 (Custom).JPG

Shoptalkforums.com

Project CFC#1, turbo, back halfed and light (new name, new car page 15)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :)

Re: Yes, I'm building..., EDIT Bought a 2165cc :) DYNO TIME

Re: Yes, I'm building..., EDIT Bought a 2165cc :) DYNO TIME

Re: Yes, I'm building..., EDIT Bought a 2165cc :) DYNO TIME

Re: Yes, I'm building..., EDIT Bought a 2165cc :) Official 10sec car

Re: Yes, I'm building..., EDIT Bought a 2165cc :) Official 10sec car!!