accelerator pumps

[mlrailguy]

Both of my carbs need pump adjusted. They do not squirt till at full throttle and I would assume they should squirt as soon as throttle began to open. Do I begin tightening or loosening the nut on rod To achieve this?
You guys have been lots of help with all other questions I've had and I greatly appreciate this.

[Leatherneck]

Has the carb been cleaned so you know the ports aren't clogged?

[mlrailguy]

had them completely apart, lots of carb cleaner and compressed air. I assume they are clean

[66brm]

Backing the nuts off will give the largest pump stroke therefore the most volume