KART

[petew]

It's probably saved you a lot of cash, but that's pretty disappointing. It's sad that many (so-called) tradesmen only want easy jobs.

P.s. looking forward to colors.

[Ol'fogasaurus]

What is the planned final color or is that a surprise? Based on what I can see it does look pretty good.

Lee

[Sepi]

Color is RAL7012 basalt grey with few yellow details, like brake saddles, coil springs etc. + brushed aluminum

[Sepi]

Color is RAL7012 basalt grey with few yellow details, like brake saddles, coil springs etc. + brushed aluminum

[Sepi]

First layers of the final coat is done. Quite ok, just few small blemishes

[Sepi]

More pain(t) today
This really was as difficult as expected, but it is now done - at least looks like it was ok after spray. Some minor flaws but as my first paint project, it could be worse.







As you see, my garage needs now complete cleaning. Watering the whole floor maybe five times has been enough for the paper, but no problem, the time to assemble everything together will start really soon

[Ol'fogasaurus]

For a first paint job, not bad at all. White is considered the "most forgiving" and the lighter colors the easier to get it right. Harder to see runs and orange peel, etc. though. Yellows are difficult not to get blotchy. Silvers, grays and the metallic are probably the most difficult (ignoring the amount of work doing candies). Again, good job!

Lee

[Sepi]

Today was the dusty job to remove with this machine the old paint from front lid. I found eleven layers and some bondo - actually quite an art.



Before any new paint, the AeroCatch locks must get the slots

[petew]

Shoulda have left the rainbow and just clear coated it! Instant gender diversity bonnet!

[Sepi]

Front end cross support looks good now:


Maybe a bit foul side of the lid,


but the other daylight side is now perfect, because next week it'll get something else than ordinary paint

[Piledriver]

Note that there is extremely corrosion resistant copper/nickel alloy brake tubing that has been used for decades in locales that use salt.
Looks like copper. It's not.
Not even expensive, never use refrigeration tubing, it costs more.

[Sepi]

Something done, but still lot to do. Front lid is covered by brushed aluminum to get some light weight illusion:



Original dashboard was quite wrong to this project and something else is coming. Now testing and then continuing with a steering column and maybe some more holes.

[petew]

Can't see your pics.

[Piledriver]

Its possible the originals were too large this was the preview.
I still cannot rationally explain why the stf cares about the image dimensions of external image links.

[Sepi]

Can't see your pics.

Yep, there seems to be some problems. My original picture collection is in Picasa3 and there was a nice sync to Picasaweb albums - But now Google is not supporting this sync anymore. So I have to send photos from my laptops hard disc to google+ pictures and there seems to be some issues of the size and publicity.