Re: Type 1 twin screw supercharger build / 9 yrs later I'm back at it

Alexander_Monday · Post by **Alexander_Monday** » Sun Feb 16, 2025 8:50 am

Printing the custom parts for the VW "cam doctor".
I have the 2rpm motor, encoder, dial indicator with data cable, and most of the extrusion and hardware already.

VW Cam Doctor.jpg

CB has shipped my parts and I got the heads back from the machine shop.

Alexander_Monday · Post by **Alexander_Monday** » Sun Feb 16, 2025 8:55 am

20250216_105321.jpg

20250216_105430.jpg

Chip Birks · Post by **Chip Birks** » Sun Feb 16, 2025 11:27 am

What's the goal here? Wanting to capture a profile of the cam?

Alexander_Monday · Post by **Alexander_Monday** » Sun Feb 16, 2025 11:34 am

Yes, specifically the custom ground cam from Jones Cams to see how aggressive it is and what it looks like "under the curve".
Also I have an FK87 and a FK87/FK10 I would like to profile for comparison.
There is not anyone local that can do it.
Most of the parts I already have.

Chip Birks · Post by **Chip Birks** » Sun Feb 16, 2025 4:25 pm

Alexander_Monday wrote: ↑Sun Feb 16, 2025 11:34 am Yes, specifically the custom ground cam from Jones Cams to see how aggressive it is and what it looks like "under the curve".
Also I have an FK87 and a FK87/FK10 I would like to profile for comparison.
There is not anyone local that can do it.
Most of the parts I already have.

Very cool

Shoptalkforums.com