project that won't run fast or far
-
joetx
- Posts: 3
- Joined: Tue Mar 25, 2025 3:09 pm
project that won't run fast or far
I have a project that won't run fast or far. Mostly around the ranch. So I have a '74 beetle pan/transaxle and a '62 1200 motor. Thinking of buying a '74 flywheel and a clutch kit and starter. Is there something else I need to contend with when mating this motor to the '74 uniy. Read something about that there is difference in rear main seals. Is there something I will have to do to mount this motor? Maybe change out the pilot bushing? Thanks for any help you can provide me. I do some mechanic work, but don't have experience with VW's.
You do not have the required permissions to view the files attached to this post.
-
joetx
- Posts: 3
- Joined: Tue Mar 25, 2025 3:09 pm
Re: project that won't run fast or far
225 members saw this post and no ideas??? Sure could use some help!
-
joetx
- Posts: 3
- Joined: Tue Mar 25, 2025 3:09 pm
-
Bruce.m
- Posts: 969
- Joined: Sun Aug 11, 2013 1:44 pm
Re: project that won't run fast or far
The flywheel on early engines have a different seal arrangement so that could present a problem. The 6V cars had a different tooth count on the flywheel too.
The gearbox will have a 12V starter motor and release bearing suited to the later clutch.
So it will need a careful pairing of the parts.
The gearbox will have a 12V starter motor and release bearing suited to the later clutch.
So it will need a careful pairing of the parts.