66mm crank & rods for 1.7, 1.8 bus engine

User avatar
volkaholic1
Posts: 224
Joined: Mon Jul 28, 2003 6:19 pm

66mm crank & rods for 1.7, 1.8 bus engine

Post by volkaholic1 »

I have a stock crank from a 1.7 liter bus engine. It will fit the 1.7 & 1.8 liter motors. Crank has never been turned on the mains or rods. Con rods are in excellent shape also. No nick or burrs.

I'm asking only $30 plus shipping.

Why so cheap? I need the space in my shop more than I need the parts. The core charge on the crank alone is $100, & the core charge on the rods is $50. So your getting a fantastic deal if you need these.

THESE PARTS ARE HEAVY ~40 LBS, SO SHIPPING IS IN THE $20 TO $35 RANGE, DEPENDING ON LOCATION.

I prefer to sell them as a set, but I will consider selling the crank by itself. Buyer pays actual shipping cost. I also am listing the pancake alum fan shroud & fan.

You can see a picture of the set at http://www.thesamba.com/vw/classifieds/ ... ?id=244301
User avatar
volkaholic1
Posts: 224
Joined: Mon Jul 28, 2003 6:19 pm

Post by volkaholic1 »

SOLD!
Post Reply