Hi again,
since my car has new, fabricated sills there are no holes for drain or anti rust spraying.
These holes has to be made but where are they placed and what size do they have respectively in an original sill?
Are there other holes for anti rust spraying then in the sills?
/Lars S
-914/4 -72 daily driver
-Husqvarna 120cc rat bike -48
-Husqvarna 120cc -52
-BMW 600 Road Scrambler -69
-Suzuki T500 Cobra -69
-VW411LE 2-door sedan -70
-Porsche 914/4 -72
-VW412LE 4-door sedan -73
-Suzuki K50 -77
The original drain holes usually were less crimped areas stamped in the seam, leaving a short opening at a few spots.
If they are truly missing...how to recreate these depends on how the PO welded the panels.
Replied to your trans issue.
Addendum to Newtons first law:
zero vehicles on jackstands, square gets a fresh 090 and 1911, cabby gets a blower.
EZ3.6 Vanagon after that.(mounted, needs everything finished) then Creamsicle.
