Page 2 of 2
Re: Racing Pads for 5.25 Wilwood Clone Calipers
Posted: Mon Mar 17, 2014 5:08 pm
by vwo60
I have fitted a set of Tarrox callipers to my Ghia, also a set of vented rotors, they are the same dimension except they are 20MM thick, they will bolt straight onto a ball joint disc brake spindle, a ball joint disc brake dropped spindle and a link pin disc brake dropped spindle with the ball joint stub, the callipers have the same offset and hole centers and the standard callipers except they fit the 20mm rotors. no adaptors or brackets required.
Re: Racing Pads for 5.25 Wilwood Clone Calipers
Posted: Mon Mar 17, 2014 5:18 pm
by Steve Arndt
vwo60 wrote:I have fitted a set of Tarrox callipers to my Ghia, also a set of vented rotors, they are the same dimension except they are 20MM thick, they will bolt straight onto a ball joint disc brake spindle, a ball joint disc brake dropped spindle and a link pin disc brake dropped spindle with the ball joint stub, the callipers have the same offset and hole centers and the standard callipers except they fit the 20mm rotors. no adaptors or brackets required.
Where can we find those parts? Part numbers or links? The rotors are like the "Kerscher" CSP rotors right?
Re: Racing Pads for 5.25 Wilwood Clone Calipers
Posted: Mon Mar 17, 2014 5:24 pm
by vwo60
Heritage vw in the UK used to do them, Tarrox site and calliper details. B27 6
http://en.tarox.com/products/racing-brake-calipers.html bolt straight on.no track increase, I run these with the CSP master cylinder 20.64mm