Page 21 of 50
Re: Turbo/EFI Baja
Posted: Mon Sep 23, 2019 6:19 pm
by Schweg
Um... is this a competition!?
It’s around 45-50mm just under 2”.
It came off of a 1.7L Hyundai Scoupe
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Mon Sep 23, 2019 6:37 pm
by buguy
Not at all! Mine is 50mm and I noticed I can make nearly 30 psi of boost at 50%-60% tps. In fact I bet if I held it steady it would make it at even lower TPS. Wondered if id be better off with something a little smaller. Maybe I would have better drivability.
Re: Turbo/EFI Baja
Posted: Mon Sep 23, 2019 7:14 pm
by Schweg
I had some conversations about it. I don’t think it’s a huge influence at close to pipe diameter. Though I think we are sized to flow more but our cams and heads won’t allow it.
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 7:14 am
by buguy
Maybe not. I cruise at 2800 rpm or so at around 16-17% that seems normal enough. But I almost feel like mine is faster at 50%-75% throttle than it is at 100%. I was thinking maybe it created better air speed. Or maybe I'm just nuts! I guess I could test it on the dyno this weekend.
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 9:39 am
by Schweg
Are you sure that your not over rotating and closing again
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 10:04 am
by buguy
Yeah I'm sure
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 3:50 pm
by Schweg
Maybe the restriction slows boost to build faster then without making power build more rapidly.
I thought Kalle got a boost from dual throttle bodies be one centralized one
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 4:31 pm
by buguy
I believe he said he made 50 more hp with the duals.
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 4:51 pm
by Schweg
I seem to remember that as well, that may have been some of it. I need to re read that thread again.
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 5:01 pm
by buguy
But that's a HUGE turbo, big intake volume, big exhaust, and plenty of rpm.
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 5:16 pm
by Schweg
Yeah I have one in the garage. Just need to build up
To it. That or look into a compound set up.
Sent from my iPhone using Tapatalk
Re: Turbo/EFI Baja
Posted: Tue Sep 24, 2019 5:17 pm
by buguy
Nitrous!
Re: Turbo/EFI Baja
Posted: Wed Sep 25, 2019 5:30 pm
by Schweg
Wanted to post a few videos, this is what I was trying to explain earlier that my AFR is fluctuating but also I am getting some voltage change as well any thoughts on what is happening would be great.
AFR Gauge Fluctuation
Thats just a 2nd to 3rd gear roll on. Was trying to capture all the gauges and some of the speed. Need to figure out a different camera mount and not holding it.
2nd to 3rd Gear
Re: Turbo/EFI Baja
Posted: Wed Sep 25, 2019 6:02 pm
by buguy
I don't know what's going on but that's awesome!
On mine I added some accelerator pump action. Mine also isn't rock solid so I'm definitely not the one to give tuning advice
Re: Turbo/EFI Baja
Posted: Wed Sep 25, 2019 6:05 pm
by buguy
Is that top number your afr target?