My -54 Ratlook & -55 oval

[SuperTrigger]

New year back to work...=)

some new things to next summer...


One question though, I have K800 springs, do I have to do something to my pauter rockers? I have heard that you have to make some clearance but is that true?

-MP-

[rgdedge]

I have the same Pauter rockers and K-800's on my Autocraft heads. Check the bottom side of the rockers at the spring retainers, I had to clearanc mine just a little because they would rub a little. Use a file or sanding block and take a little off at a time and check your clearances so you wont take too much off.
Tim

[SuperTrigger]

Ok, thank's for the reply. Have to take closer look.

[SuperTrigger]

Some movement again

Short Block ready

[SuperTrigger]

Some small update, tank bracket updated, front end wiring almost done.

More in my Blog.



-MP-

[SuperTrigger]

plim... At last I got my heads back... More stuff in my blog

[SuperTrigger]

Coming together...


Small chance to get it running next week...

-MP-

[SuperTrigger]

Tsising...



and first Waasa Aircooled Dyno Day...

Some clips

I'll try to get some time to add little story to my blog.

-MP-

[SuperTrigger]

Uuh last week vent fast. I got all together at Friday, but unfortunately I had some Issues with megasquirt rpm and could not get it started.



-MP-

[SuperTrigger]

small update, engine is running but I think this summer is over for -54. I just bought "new" -55 Oval and planning to drive it to SCC event...



-MP-

[SuperTrigger]

Jiihaa....



More in my blog later....

Some small issues...



-MP-

[heliarc]

I must say, you are a wizard when it comes to fabrication.I hope you are well pleased with your progress so far.You have built an amazing machine and I thank you for posting pictures of it.

[SuperTrigger]

I must say, you are a wizard when it comes to fabrication.I hope you are well pleased with your progress so far.You have built an amazing machine and I thank you for posting pictures of it.

Thanks for the kind word's.

What comes to my progress, I'm pleased to what it's now, but not to that fact that it has take so long to get there... and there is lot's of work ahead.

-MP-

[SuperTrigger]

New sticks

JayCee 190.000psi... hope these are better than my last Cromo sticks were...



More in my blog.

-MP-

[SuperTrigger]

This years last event Waasa Aircooled Dyno Day #2 is over

I'm pleased to say that my car didn't broke and gave decent numbers 172hp@6404rpm

some videos in my blog...

-MP-