Those are big injectors! I have 850's and the most i think i ever saw was 65% duty cycle. That was on 30 psi of boost and E85. I don't remember where they were with the new engine.
Chip Birks wrote:Dash looks good! Gonna be compounding by next week?
Thanks!
Um.... doubtful. I need to get my rear cage modified and back on to hang the holset. I need to weld up all the exhaust and intake plumbing between the two. And buy silicone adapters for all that as well.
Unless I just use the 9b and 13t compound combo then it’s a lot less BS. Now I need to do some research.
Oh and Buguy I was wrong they are 850cc. I hope to see 35-40 psi with the compound set up.
That's how mine was too. It seemed that i would run out of rpm before it stopped making boost. Most i think i ever saw was just over 31 psi.
If you hit 40 psi on stock stuff you will be my new hero!
buguy wrote:That's how mine was too. It seemed that i would run out of rpm before it stopped making boost. Most i think i ever saw was just over 31 psi.
If you hit 40 psi on stock stuff you will be my new hero!
The compound set up will push a ton! 40 is the low end for what I’m building. To keep things at peak efficiency I need like 48-50.
But I’m hoping to be up and running with it and e85 in a few weeks. But probably first of the year.
