Posted: Tue Nov 07, 2006 6:58 pm
steve i will post some pics tomorrow of a thru the tunnel conduit run tomorrow , i have a race car hauler that needs to get finished wired tonight so it can be picked up tomorrow night.
Page 5 of 5
Posted: Sat Sep 01, 2007 7:31 am
Bump
Posted: Mon Sep 03, 2007 4:56 am
this takes a little patience sometimes to get it thru and once in a while i even unbolt the shifter so i can get in there to help it along with a coat hanger but it can be done and have done this almost countless times now
In a standard car i exit the tunnel before the shift rod coupler hole so to put me more in the battery tray area
Posted: Wed Nov 26, 2008 7:18 am
We sure are missing a lot of pics in this thread. 
Re: snd wiring test
Posted: Mon Apr 11, 2011 5:32 pm
desert guy can you desctribe how you switch the relay in this picture please, im not sure which one is switching the power to go from low to high beams
thanks
Jeremy
thanks
Jeremy
Re: snd wiring test
Posted: Tue Apr 12, 2011 8:00 pm
Toggle switch wired to terminal 30 supplies 12 volts to power lights...
Toggle switch wired to terminal 85 controls high/low beam of headlights...
Also it would be better to use second relay to replace high current "toggle switch" connected to terminal 30 ....
Dale
Toggle switch wired to terminal 85 controls high/low beam of headlights...
Also it would be better to use second relay to replace high current "toggle switch" connected to terminal 30 ....
Dale