Drag and Drive Baja

With Turbo and Super charging you can create massive horsepower with vw motors.
andy198712
Posts: 2433
Joined: Wed Apr 13, 2011 1:01 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by andy198712 »

I use mac with TunerStudio and works...
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

andy198712 wrote:I use mac with TunerStudio and works...
Did you need any special drivers or anything?


Sent from my iPhone using Tapatalk
User avatar
Chip Birks
Posts: 4022
Joined: Wed Mar 12, 2008 5:59 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Chip Birks »

Does the computer make any kind of noise when you plug in the cable? Some kind of "something got plugged in" noise. I'm trying to remember if there was an issue with my USB setup at one point. I may have had the in and out wires mixed up. Once I switched them it worked fine. It's been so long since I wired it though, I can't remember for sure.
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

No noise.

I’m gonna wire a new cable tonight and try it again. It’s frustrating so close to it running again!


Sent from my iPhone using Tapatalk
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

I’m at a loss right now.

Wired a new cable, checked continuity with meter before and after pinning connector.

Checked all fuses and relays to include in the MS box. All checked good all powered up appropriately.

Installed drivers for d2xx I think? It is the only thing I’m super unfamiliar with.

If anyone had any Mac and MS secrets please do tell. I’m going to ask around for a cheaper windows net book or something to try and remove my computer as a questionable item from the equation.

Did get the new header installed. Photos to follow. But running out of steam to work with out being able to connect a computer and make any progress.


Sent from my iPhone using Tapatalk
Clonebug
Posts: 4738
Joined: Thu Feb 15, 2007 9:28 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Clonebug »

I bought a cheap Lenovo laptop at "Best Buy" which I use exclusively for the buggy. It is for tuning and I also take on trips of any length so I can tune when gone from home and also I can download any pics or videos I capture to put on my build page.
I think I $225.00 for it.
It's not the fastest thing but it works for what I need it to do. There are cheaper ones if you can handle a smaller screen but with my old eyes I need a little bigger one.
I just installed an 800 watt inverter that powers the computer perfectly. I picked it up at a swap meet for something like $10.00. It was worth taking a chance that it didn't work...but it works great. The battery only lasts for about 2.0 hours due to the bright screen I need in order to see it when in the buggy.
I also have the bluetooth connector plugged into the ECU so I just have to get in the buggy and it connects as soon as I start it up.....
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
User avatar
buguy
Posts: 6209
Joined: Wed Jan 26, 2005 8:53 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by buguy »

I would like to have Bluetooth. Seems like a worthwhile upgrade.
Clonebug
Posts: 4738
Joined: Thu Feb 15, 2007 9:28 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Clonebug »

For the price you paid it should have come with it....😫🤫😳😜
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
andy198712
Posts: 2433
Joined: Wed Apr 13, 2011 1:01 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by andy198712 »

What cable are you using with your Mac? I struggled with a cheap cable for ages, then brought a fdti chipset one and it worked right away....
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

andy198712 wrote:What cable are you using with your Mac? I struggled with a cheap cable for ages, then brought a fdti chipset one and it worked right away....
I have been using cheaper ones, I’m thinking I might remove everything and start over. Then maybe try a windows computer.


Sent from my iPhone using Tapatalk
User avatar
Chip Birks
Posts: 4022
Joined: Wed Mar 12, 2008 5:59 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Chip Birks »

Clonebug wrote: Sat Jun 08, 2019 9:03 pm For the price you paid it should have come with it....😫🤫😳😜
We spend it somewhere...
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

Chip Birks wrote:
Clonebug wrote: Sat Jun 08, 2019 9:03 pm For the price you paid it should have come with it....ImageImageImageImage
We spend it somewhere...

Right! We’ll win some lose some, trying a new computer tonight


Sent from my iPhone using Tapatalk
Clonebug
Posts: 4738
Joined: Thu Feb 15, 2007 9:28 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Clonebug »

Schweg wrote: Sun Jun 09, 2019 8:45 am
Chip Birks wrote:
Clonebug wrote: Sat Jun 08, 2019 9:03 pm For the price you paid it should have come with it....ImageImageImageImage
We spend it somewhere...

Right! We’ll win some lose some, trying a new computer tonight


Sent from my iPhone using Tapatalk
I was giving Buguy a little razzing........sorry.
Stripped66 wrote:The point wasn't to argue air temps with the current world record holder, but to dispel the claim that the K03 is wrapped up at 150 HP. It's not.
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

Re post
User avatar
Schweg
Posts: 1141
Joined: Sun Feb 04, 2018 1:48 pm

Re: Turbo/EFI Baja (renamed to eliminate confusion)

Post by Schweg »

Clonebug wrote:
Schweg wrote: Sun Jun 09, 2019 8:45 am
Chip Birks wrote:
Clonebug wrote: Sat Jun 08, 2019 9:03 pm For the price you paid it should have come with it....ImageImageImageImage
We spend it somewhere...

Right! We’ll win some lose some, trying a new computer tonight


Sent from my iPhone using Tapatalk
I was giving Buguy a little razzing........sorry.

No worries. Looking at inverters now for the Blue Bomber. Also borrowing the wife’s lap top. I’ll give it a try maybe this afternoon.




Sent from my iPhone using Tapatalk
Post Reply