Shoptalkforums.com

Clonebug wrote: ↑Sun Jun 09, 2019 9:44 am

Schweg wrote: ↑Sun Jun 09, 2019 8:45 am

Chip Birks wrote:

Clonebug wrote: ↑Sat Jun 08, 2019 9:03 pm For the price you paid it should have come with it....

We spend it somewhere...

Right! We’ll win some lose some, trying a new computer tonight


Sent from my iPhone using Tapatalk

I was giving Buguy a little razzing........sorry.

Sorry, my razcasm came out poorly. I was poking as well.

Got the new turbo header installed and the turbo on.



Now I need to re configure my piping from the turbo to the throttle body.

Also still no luck on the ECU connecting with a different computer. I get a noise but the computer says it’s not a recognized usb device and TunerStudio still doesn’t find it.

Other notes, my fuel pump is in backwards and my fuel pump relay is bad.

2 steps back one foreword.


Sent from my iPhone using Tapatalk

Have you tried flipping but the in and out on the usb? It sounds like its powering and and grounded. It's just not sending signal.

Not yet. Ill flip em tonight.

Did you just run USB and did you need drivers other then what’s recommended?


Sent from my iPhone using Tapatalk

Your almost there brother! I know it's frustrating but you will get it!
And don't worry fellas! I can take a little poking! Lord knows I dish it out!

buguy wrote:Your almost there brother! I know it's frustrating but you will get it!
And don't worry fellas! I can take a little poking! Lord knows I dish it out!

Honestly, I’m frustrated but still enjoying it for now.

I’m keeping my head up, in that all this pain is self induced. And this is just the beginning of trouble shooting. All that said software issues drive me crazy as I’m a visual guy it’s hard for me to get some of it. Despite all my informal and formal training.

Your right behind me man.


Sent from my iPhone using Tapatalk

Yep. In the end you will know more about it and be able to fix it on the side of the road someday.

The amount of time i lost on a cheap cable, the fdti ones are like £20.... that’s cheaper than a laptop

andy198712 wrote:The amount of time i lost on a cheap cable, the fdti ones are like £20.... that’s cheaper than a laptop

I’m not against buying a nice cable. But I’m at a loss with how it matters as I have to cut off the end and wire it in directly.




Sent from my iPhone using Tapatalk

Schweg wrote: ↑Sun Jun 09, 2019 12:51 pm Not yet. Ill flip em tonight.

Did you just run USB and did you need drivers other then what’s recommended?


Sent from my iPhone using Tapatalk

Hopefully that's all you need. I've definitely seen the same errors, and I believe that's all I had to do. I don't have an Apple computer, and don't think I had to download any drivers. Then again, I've usually had wifi nearby and my computer may have done it on it's own.

The struggle is worth it in the end. Especially when it comes to future troubleshooting and such. Keep going!

Chip,

Working with two different computers we will see which one I can get working first. I haven’t found anything googling.

Hoping to get an email response from the help desk in the morning.

Ben


Sent from my iPhone using Tapatalk

My fingers are crossed for you!

CHIP I OWE YOU A DRINK! Or two!!

Data lines where reversed!?! Not sure how I screwed that up twice but....

It connected!! To bad I have to work tomorrow so I’m being responsible and not burning the midnight oil. But my short list of items to fix before starting is going to get slim real quick!

I’ll keep you guys posted! Thanks for your help!


Sent from my iPhone using Tapatalk

Yay!

Schweg wrote: ↑Sun Jun 09, 2019 6:52 pm CHIP I OWE YOU A DRINK! Or two!!

Data lines where reversed!?! Not sure how I screwed that up twice but....

It connected!! To bad I have to work tomorrow so I’m being responsible and not burning the midnight oil. But my short list of items to fix before starting is going to get slim real quick!

I’ll keep you guys posted! Thanks for your help!


Sent from my iPhone using Tapatalk

I'm beginning to wonder if it's a pinout issue on the diagram itself, cause I'm pretty sure I dealt with it at least once. If not both times I wired that system up.