76 Westy Brake Caliper Thickness

The quintessential people and stuff mover.
User avatar
MrGolf
Posts: 340
Joined: Fri Oct 18, 2002 1:01 am

76 Westy Brake Caliper Thickness

Post by MrGolf »

Can someone tell me what the calipers are new and the minimum thickness before replacement.....Thanks.
WestyPop
Posts: 123
Joined: Mon May 02, 2005 11:26 am

Re: 76 Westy Brake Caliper Thickness

Post by WestyPop »

MrGolf wrote:Can someone tell me what the calipers are new and the minimum thickness before replacement.....Thanks.
I'm willing to check the Bentley & even go out & measure my '79, but, I'm not understanding what you want... measurement on the calipers(total thickness: inside to outside?), the pads, or the rotors (new & worn to min.?), or what?
User avatar
MrGolf
Posts: 340
Joined: Fri Oct 18, 2002 1:01 am

Rotors

Post by MrGolf »

I am sorry. I mean the min and max measurements for the rotors.
Thanks
wildthings
Posts: 1171
Joined: Thu Jun 03, 2004 12:42 am

Post by wildthings »

The wear limit is 11.5mm, or 0.452". Rotor typically have a lip on their edge which will make checking them with low tech tools difficult, but with the lip ground off the rotors are shot if you can slip a 7/16 wrench over the them.
WestyPop
Posts: 123
Joined: Mon May 02, 2005 11:26 am

Post by WestyPop »

Original rotor thickness is supposedly 12.9mm, although some of the Chinese-produced rotors may vary from that, especially if clean-up cuts are necessary to make the new cheap rotors even usable.
Post Reply