Pan paint/coatings?

[trackersteve]

Took the body off the pan on the "project" want type of paint work best on the pan? uncoat the bottom? Trans? semi gloss or gloss? not a show car, but do want it to look good and hold up. Thanks.

[MNAirHead]

Overall..

1-Strip down to bare steel
2-repair all areas
3-clean
4-etch primer
5-sealer primer
6-coating

for coating, you can use enamel paint, rhino liner etc.

When on a budget, we commonly use Zero Rust (about 50/gal).. the industrial coatings have very specific instructions.

T.