Page 1 of 1
Ring and Pinion on EBayers for Auto....
Posted: Mon Dec 14, 2009 8:56 pm
by vwbill
Hey, seem this on ebayers...# 280438793610 Bill,jr.
Re: Ring and Pinion on EBayers for Auto....
Posted: Tue Dec 15, 2009 5:49 am
by raygreenwood
Hmmmm very cool! Ray
Re: Ring and Pinion on EBayers for Auto....
Posted: Wed Dec 16, 2009 8:52 pm
by vwbill
So how Auto and Manual ring and pinions? Bill,jr.
Re: Ring and Pinion on EBayers for Auto....
Posted: Wed Dec 16, 2009 8:56 pm
by wildthings
Will these work in the later 010 gear boxes or are they 003 specific?
Re: Ring and Pinion on EBayers for Auto....
Posted: Thu Dec 17, 2009 10:41 am
by raygreenwood
What does the 010 go into? They will be specific to the type 3 and 4 layout. It shoudl fit either type 3 or 4 automatic. Ray
Re: Ring and Pinion on EBayers for Auto....
Posted: Thu Dec 17, 2009 8:30 pm
by wildthings
If I have my tranny numbers and years right the 010 came in the later bays and the 090 came in the Vanagons. I was actually wondering if this gear set could be used in a Vanagon with a TDI or other higher torque engine.
raygreenwood wrote:What does the 010 go into? They will be specific to the type 3 and 4 layout. It shoudl fit either type 3 or 4 automatic. Ray
Re: Ring and Pinion on EBayers for Auto....
Posted: Fri Dec 18, 2009 8:10 am
by raygreenwood
Its possible.....but the gear ratio having more teeth on the bus...generally makes it a larger diamter ring. What ends up happening usually is that the differential housing then gets to be too fat to fit the ring gear onto. Ray