Shoptalkforums.com

Hi, need to pull my camper up a slight incline with no room to get a tow vehicle in front. Planning to use a ratchet type pulley but need a rough idea of the weight to buy the right one. its a 73 bay with all the normal camper interior parts.

In Kg if possible.

Cheers Karl

1640 front axle 1860 lbs rear
744 kg 844 kg

hope that helps. I have used a high lift jack to winch my bay out of things before, 6k lbs pulling power, never needed it all. otherwise what kind of shape is your rear bump/frame in? can you just nugdge it along with some wood and a blanket to protect the paint and a second car?

I've used an old, beat 1500lb come-along to pull both my 79 Bus and 70 Westy up on to trailers, the Westy with flat tires.

Hi, thanks guys, I think that sorts out my problem, I was planning on a 1250kg ratchet puller so I think I've got it covered.

Thanks again Karl.