Page 1 of 1
Door Striker Screws?
Posted: Mon Dec 10, 2012 3:41 pm
by Max Welton
What size philips tool do I need for the door strikers on a 68 squareback?
Max
Re: Door Striker Screws?
Posted: Mon Dec 10, 2012 3:48 pm
by supaninja
I use one of those KD Tool hammer drive screwdrivers, you know the ones that hit with a BFH, I think I paid $10 for mine.
Re: Door Striker Screws?
Posted: Mon Dec 10, 2012 4:49 pm
by Piledriver
Hinges #4 phillips, I until recently used a hammer-type manual impact.
The door handle and lock striker parts are P3 and some P4.
I bought a bit set just for that purpose, although i found that with the proper bit and a not pre-destroyed screw a real impact wrench (of the wheel lug type) works ~instantly.
(have an 18V Ryobi 1/2" impact that I use for a LOT of things lately)
Re: Door Striker Screws?
Posted: Mon Dec 10, 2012 7:03 pm
by Max Welton
I have a #4 for my KGs hinges that works in my impact wrench. Too big for the type-3 of course.
Thanks!
Max