Camshaft selection

Teo1303 · Post by **Teo1303** » Sun Jul 02, 2017 1:17 am

Hello there

I am building a new VW 2007 cc engine ( 90.5x78 ) with EMPI HPMX 44 carbs and 40x35.5 Heads with 1.25 : 1 rockers

I am between W 120 or a FK8 cam to choose ... Which is better for me for street driving only???? My needs are for a powered 1303 about 140HP and to rev near 6500rpm

Will you help me for this please???

66brm · Post by **66brm** » Wed Jul 05, 2017 4:48 am

I would run the fk8 with 1.4 rockers, the w120 may struggle the get the top end you want.

Teo1303 · Post by **Teo1303** » Wed Jul 05, 2017 5:11 am

@66brm thanks so much ...

ainokea · Post by **ainokea** » Mon Jul 17, 2017 7:42 pm

The Engle 130 should be adequate also with 1.25 rockers

Teo1303 · Post by **Teo1303** » Mon Jul 17, 2017 9:55 pm

ainokea wrote: ↑Mon Jul 17, 2017 7:42 pm The Engle 130 should be adequate also with 1.25 rockers

Thanks

asteff1 · Post by **asteff1** » Tue Jul 18, 2017 7:55 am

Is there a thread around here which can tell me more about camshafts? Thanks!

P.S.: Sorry if an admin deems this as off-topic.

Shoptalkforums.com

Camshaft selection

Camshaft selection

Re: Camshaft selection

Re: Camshaft selection

Re: Camshaft selection

Re: Camshaft selection

Re: Camshaft selection