getting closer

[dino1369]

My first turbo build is inching along.. Holley tapped for vacuum. End casting tapped for the CB black box. IAT and wideband bungs welded. Removable apron almost done. Just got most of the fittings for the fuel system. I'm going to try to run it without a regulator. The fuel pump puts out 7psi so I''m hoping the carb can take it. I'll need to make a bracket for the accellerator cable once I figure out which one I'm going with. Also hoping my stage 1 plate and racing daiken hold. We shall see. Enjoy the pics.

[dino1369]

Got the turbo blanket fitted. Getting there

[dino1369]

Pumping out the jams while I work

[V8Nate]

Bitchin! Nice work

[dino1369]

Thanks Nate. I have no idea what I'm doing. I just hope it doesn't blow up when I start it. Fingers crossed.

[rubenski]

Nice, what kind of engine?

Verstuurd vanaf mijn SM-A528B met Tapatalk

[madmike]

It won't blow up starting it,, Just keep a sharp eye on the A/F ratio gauge!!!! when boosting :wink
I don't think that clutch disc will hold.,,, mind didn't

[madmike]

Hey Rube, I thinking it is one of 'AJ's' 2180cc

[dino1369]

It's not an AJ engine. The header isn't from him either. Neither is the carb. I've been collecting parts and cobbling this together over the last few years, and doing everything myself. Does this vac/boost line diagram look right?

[madmike]

Good u pieced it together,, don't care for his Business dealings ,,
Vac diagram, looks like it will work , mine looks like spaghetti cuz of the reflection on the shroud

[dino1369]

Almost there! On the home stretch. Just power to the gauges, throttle cable, check the fuel system for leaks and make sure the black box connects. Soooo close.

[rubenski]

With a hat for when it rains?

Looks good!

Verstuurd vanaf mijn SM-A528B met Tapatalk

[madmike]

looks good!

[dino1369]

Having issues getting the laptop and the black box to connect. Windows wont let me change the driver. Eventually I'll figure it out... I hope.

[dino1369]

At least the wiring is done.