Type 4 Dual 34 ICT manifold fittings
-
ThomasK
- Posts: 2
- Joined: Wed Apr 29, 2015 9:22 am
Type 4 Dual 34 ICT manifold fittings
There are 3 large fittings installed on the manifold of the dual 34 ict on my 1.8 type 4 engine. 2 on the drivers side in the runners, and 1 on the #1 cylinder runner on the passenger side. I assume 2 are for a crossover tube and 1 is maybe for brake booster? Only instructions I have seen for these don't have the fittings at all. Do you best to ignore the bad wiring and missing tin. I just need to get this thing running enough to drive on a trailer.
You do not have the required permissions to view the files attached to this post.
-
AdminSteve
- Site Admin
- Posts: 264
- Joined: Mon Dec 04, 2006 8:46 am
Re: Type 4 Dual 34 ICT manifold fittings
Balance tube and vac for brake booster would be correct.
S&S Aircooled Parts and Accessories
645 S State College Blvd, Unit E
Fullerton, CA 92831
www.ssaircooled.com
(714)886-7636 Phone
645 S State College Blvd, Unit E
Fullerton, CA 92831
www.ssaircooled.com
(714)886-7636 Phone