Do you like to go fast? Well get out of that stocker and build a hipo motor for your VW. Come here to talk with others who like to drive fast.
Glenn
Posts: 5108 Joined: Fri Mar 09, 2001 12:01 am
Post
by Glenn » Sun Nov 16, 2003 5:24 pm
I recently acquired a vintage Bosch Screamer Kit. It came with the box and Blue 019 distributor. I just purchased the missing 6v Bosch Blue Coil to help complete it.
There's a 3rd compartment in the package and i'm wondering what goes in it. It's 3/4" wide and 1.5" long and had cellophane tape over it. It's in the upper left of the picture.
Anyone know what goes there?
bugboy696
Posts: 309 Joined: Mon Jan 20, 2003 12:01 am
Post
by bugboy696 » Sun Nov 16, 2003 6:26 pm
spare set of points?
Billyisgr8
Post
by Billyisgr8 » Sun Nov 16, 2003 7:26 pm
condensor
Glenn
Posts: 5108 Joined: Fri Mar 09, 2001 12:01 am
Post
by Glenn » Sun Nov 16, 2003 7:44 pm
The distributor already has the points, condensor and rotor already installed. I doubt they'd give you any spares.
Deathbug74
Posts: 595 Joined: Fri Dec 22, 2000 12:01 am
Post
by Deathbug74 » Sun Nov 16, 2003 8:09 pm
a resistor to go with the ignition coil?
mharney
Posts: 3365 Joined: Sun Feb 10, 2002 12:01 am
Post
by mharney » Sun Nov 16, 2003 8:29 pm
Yeah I am betting it was a ballast resistor.
Pillow
Posts: 2940 Joined: Mon Oct 15, 2001 1:01 am
Post
by Pillow » Mon Nov 17, 2003 8:48 am
No help here, just wanted to say that it is super old school cool to have an old screamer box
GDRBO
Posts: 2574 Joined: Tue Jun 27, 2000 12:01 am
Post
by GDRBO » Mon Nov 17, 2003 5:28 pm
A small tube of grease for the points.
getsmarx
Posts: 160 Joined: Thu Mar 06, 2003 12:01 am
Post
by getsmarx » Mon Nov 17, 2003 10:10 pm
My vote is for a resistor. I believe that some of those kits came with the red coil which (so I've heard) uses an external resistor.
I have one of those 019 distributers. I rebuilt it using an NOS rebuild kit that I found. I could not find blue paint that looked correct so I repainted it black.
Charles
Glenn
Posts: 5108 Joined: Fri Mar 09, 2001 12:01 am
Post
by Glenn » Wed Nov 26, 2003 2:40 pm
I found the correct coil and it seems a wire boot goes in the 3rd opening. Here's the complete kit.
Rjelli
Posts: 1 Joined: Tue Apr 25, 2023 2:21 am
Post
by Rjelli » Tue Apr 25, 2023 2:22 am
Cap for the ignition cable.
You do not have the required permissions to view the files attached to this post.
slayer61
Posts: 133 Joined: Wed Jul 14, 2021 10:32 am
Post
by slayer61 » Tue Apr 25, 2023 8:53 am
Wow! 20 years later!
AdminSteve
Site Admin
Posts: 264 Joined: Mon Dec 04, 2006 8:46 am
Post
by AdminSteve » Tue Apr 25, 2023 11:06 am
S&S Aircooled Parts and Accessories
645 S State College Blvd, Unit E
Fullerton, CA 92831
www.ssaircooled.com
(714)886-7636 Phone